Sävar Turbo Site

right ok! [red wine area uk time for me atm ] a friend of mine has a bmw s14 engine, it spat the shim off the top of the buckets and did the engine in. He thought it was of the top of hat shims. The T5 cam i use, and Stefan, i read somewhere, again red wine non making memory work well, someone measu...

is the lack of lift on the valve because you need to have the clearance between cam and tappet when cold? I recently found in my engine a guide to be very sloppy after maybe 300 miles. We think its because i had a sticking injector and its washed oil from the guide. Quat, oh i see, you use the stand...

I have a b230a non turbo engine, its never going to do more than 190 bhp imho. Its in a bmw e36. At the moment , the engine has a tubular exhaust manifold, not a kl racing one , but very similar. At one point i had the cast manifold, 50mm down pipes, and the car made 167 bhp at the flywheel. I swapp...

ah maybe! i took my engine to get machined, and i ended up with teh standard size, so all was well! thanks anyway

quat, if you dont use lash caps, what do you use?


thanks

ah so my block needs a hone and a fwe bits, so it dosnt need new pistons, but it was interesting if anyone knew for future . thanks

I have a b230A engine, it needs a rebore really, but here in england there dosnt seem to be any pistons available, no one stocks them anymore. Is there a later piston or one from a completely different engine i could use? I have a feeling there is something as i know of an engine builder here that d...

well thankyou both! ive ordered the grey ones, even though it says 360cc in the ebay advert.

thats fantastic, ive found some on ebay here in England, £135, i take it these are cone type spray pattern? thanks Part number: Siemens Deka 9179379. Please check your own injectors are identical before purchase. Flow rate: c.360cc/min at 3 bar of pressure. Resistance: c.15.3 Ohms (high impedance). ...

microsquirt, sorry forgot to say. its all programmable

I have a b230 with the E type inlet, it has a 300 deg t5 cam in it, upped the compression, im hoping for 160-190 bhp out of it. I had the volvo t5 injectors in it, but they are damaged. They are expensive here now , what CC of injector should i be looking at. M3 ones are 263CC but im not sure if the...

thankyou!

should i run a brp6es in my engine? Its 11:1 compression, non turbo, revs to 7, on injection.


thanks

SO! i thought id post about my car, and where it is at. It turns out, the k-jet manifold is legal with injectors welded into it for our road rallying. I bought a manifold from viking fabrications in the uk here, i think many will know of this guy reading. https://bmwrallyparts.co.uk/minipics/bmw/881...

yes maybe that was it! i remember something like 116 and 116 degs.

ive only just put the engine back in the car today, cant wait to get it running!