Sävar Turbo Site

Hi,
I have a question for the Holset masters,

I bought a Holset turbo from a turbo dealer in my area for my Mercedes M104 2.8 project.

The specs on the turbo,

Holset HX40w Compressor housing.

8 Blade 60mm x 86mm

Holset HX35 Turbine Housing 12cm Twin scroll.

12 Blade 64mm x 76mm

My question is how much HP can i get from this turbo?

Thank you

-

Thank you Big Al,

Its more than i need.

I was just hoping that it can flow more than 400bhp.

I have a very similar turbo on my BMW 2.8l engine. I have 505hp on The hubs at around 1.2bar without stressing The turbo.
My turbo is a holset hx40w 58mm in and 65mm out without #17 housing

Very good power at 1.2bar!
but you have much larger exhaust housing, mine is 12# from HX35