Idle air control valve

Insprutning, Tändsystem och Elektronik

Moderator: backeliten

bojke
Lite mer laddtryck
Inlägg: 23
Blev medlem: sön jan 05, 2014 8:54 am

Idle air control valve

Inlägg av bojke »

Hi guys.Recently i bought standalone Maxxecu Race which i want to install on my car.The problem for me ,is that i do not understand how to wire idle air control valve.I want to use original one(factory installed) from Bosch with part number 0280140553,which is 3 wire motor. I found that middle pin is going to plus 12v,and two other pins are going to factory ECU(in original wiring).Where should i connect them into Maxxecu?Is this type of valve supported?What i found on internet is one of the pins is for closing and one for opening the valve,is this true?

Regards
Oskar Johansson
För mycket laddtryck
Inlägg: 428
Blev medlem: tor maj 08, 2014 7:54 pm
Ort: Växjö

Re: Idle air control valve

Inlägg av Oskar Johansson »

I hope you understand Swedish but i found this http://server.pure-pf.com/phpBB/viewtop ... =1&t=90397
bojke
Lite mer laddtryck
Inlägg: 23
Blev medlem: sön jan 05, 2014 8:54 am

Re: Idle air control valve

Inlägg av bojke »

OK thanks,thats what i needed. :wink:
Skriv svar