Saabel Garage; GMC Typhoon #FinnTyphoon

Projektrådar med information och bilder om olika byggen
keme
Forumsberoende
Inlägg: 508
Blev medlem: tor nov 12, 2009 10:01 am
Ort: Finland

Saabel Garage; GMC Typhoon #FinnTyphoon

Inlägg av keme »

Evolution of Opel Rekord in finnish way.

In the begining there was 1.7 engined Opel Rekord C -66

Bild

After first summer the original engine got ripped off from engine bay.

Bild

Then it required a bit of welding. After that the hell broke loose. CIH engines are too old and powerless, so something new had to be done.

Bild

20XE with OHC 240 Getrag was fitted in Rekord.

Due to high cost of throttle bodies turbo charging was only reasonable option to achieve resonable power.

At this stage 1 Ihi VF29 was fitted under hood.

Bild

Exhaust pipe needed a bit of improvisation.

Bild

Though it went quite near front tire it did NOT heat up the tire nor front fender.

Then I wired up the engine for Tatech Pro 6 engine management system and "rusted" the valve cover

Bild

Then just before end of summer 2008 I got engine running!

Bild

Picture is taken in Opel club finland summerparty 1/4 mile line up :)
btw. I won

After that event I registered the car and the regiseration went rather easily.

At this point the setup was this:

- 20XE with Z20LET pistons
- Tatech Pro 6 engine management system
- Ihi VF29 turbo charger
- 630cc injectors
- Audi Coil On Plugs
- OHC 240 Getrag
- Opel Commodore A LSD rear axle
- Spax KSX Shock absorbers in every corner
http://keimo.kuvat.fi/kuvat/Opel+Rekord" onclick="window.open(this.href);return false; ... o/teho.jpg

In 2008-2009 winter I assembled roll cage, Sparco EVO bucket seats and 4-point harnesses.

Bild

Summer 2009
Bild

Tested few times quarter mile and results were a bi disappointing. Best time 14.19s and highest end speed 171 km/h.

Because of that hell broke loose before the end of summer.

Bild

Saab B204 engine, adapter plate and BMW ZF gearbox.

Bild

Toyota Hiace axle and four link kit from Summit

Bild

First version of exhaust manifold with Holset HX40Super

Bild

Firewall done.

Bild

At this point.

- Saab B204 engine
- BMW ZF gearbox from e36 M3
- Sachs -618 clutch
- Toyota Hiace axle with LSD

Hopefully running on street on next summer.

Picture links:
http://keimo.kuvat.fi/kuvat/Saabel%20Rekord%20C%20-66/
http://keimo.kuvat.fi/kuvat/Opel+Rekord+C+2.0+Turbo/

Updates will be done when something happens :)
Senast redigerad av keme den tor mar 14, 2024 10:21 pm, redigerad totalt 23 gång.
Användarvisningsbild
Herman
Forumsberoende
Inlägg: 507
Blev medlem: sön jan 06, 2008 8:08 pm
Ort: Finnerödja

Inlägg av Herman »

Nice :thumbright:
nicke.t
Forumsberoende
Inlägg: 1885
Blev medlem: ons okt 03, 2007 10:00 pm
Ort: piteå/umeå

Inlägg av nicke.t »

cool.
tel 0707149931
Användarvisningsbild
Volvex
För mycket laddtryck
Inlägg: 157
Blev medlem: mån sep 18, 2006 3:01 pm
Ort: Växjö
Kontakt:

Inlägg av Volvex »

Nice :thumbright:
please check in to www.lowbudgetrides.com
a website dedicated to builds like yours
keep up the good work eller nått =)
Användarvisningsbild
Gunnar S
Lite mer laddtryck
Inlägg: 36
Blev medlem: tor okt 08, 2009 8:42 am
Ort: I ett garage i Höga kusten...

Inlägg av Gunnar S »

He he..
Awesome!!
hell broke loose
:thumbright:
Holger
För mycket laddtryck
Inlägg: 256
Blev medlem: ons jun 06, 2007 10:26 pm
Ort: Tibro

Inlägg av Holger »

Sweet! I have an Ascona B with b204l + hx40. Very good combo.

Some questions. How did you solve clutch/flywheel? Special flywheel?
keme
Forumsberoende
Inlägg: 508
Blev medlem: tor nov 12, 2009 10:01 am
Ort: Finland

Inlägg av keme »

Volvex skrev:Nice :thumbright:
please check in to www.lowbudgetrides.com
a website dedicated to builds like yours
keep up the good work eller nått =)
I have visited that site few times, but it seams to be quite small and there is not so much discusion about anything. Just few posts a week.

For flywheel I was planing to use the one for Saab 240mm clutch, but modify that to fit Sachs -618 cluch in it with sintered plate. I am propably going to do all weldings first and then focus on clutch problem.
Användarvisningsbild
Perkele70
Forumsberoende
Inlägg: 1058
Blev medlem: sön maj 06, 2007 9:48 am
Ort: ELDSMARK /GIDEÅ /ÖRNSKÖLDSVIK

Inlägg av Perkele70 »

kiva kun vähän suomalaisia autoja tulee forumiin! :thumbright: tuo Hiacen perä näyttää olevan joku kopio Moparin 8 3/4 axelista!Missä päin suomea asut?Terv Palle. :thumbright:
har inga roliga bilar!;)
keme
Forumsberoende
Inlägg: 508
Blev medlem: tor nov 12, 2009 10:01 am
Ort: Finland

Inlägg av keme »

Jag bor i Tammerfors.

I even got something done, but still have some welding to do. Should be almost possible to get shock absorbers assembled in next week.

Bild

Bild

Bild
keme
Forumsberoende
Inlägg: 508
Blev medlem: tor nov 12, 2009 10:01 am
Ort: Finland

Inlägg av keme »

Back on wheels.

Bild

Bild

Those 15" wheels look so tiny. Luckyly I have 17" BMW Steel wheels waiting for tires 8)
Duke of Cruel
För mycket laddtryck
Inlägg: 110
Blev medlem: lör sep 05, 2009 3:15 pm
Ort: kronoberg

Inlägg av Duke of Cruel »

really nice m8,

what kind of wheel bearings and brakes are you running?

DoC
inga kat = inga co2
keme
Forumsberoende
Inlägg: 508
Blev medlem: tor nov 12, 2009 10:01 am
Ort: Finland

Inlägg av keme »

In front I have Opel Commodore B 271x22 discs and brake calibers. I am not planing to change those for now. Maybe if I manage to make extra time, I could fit some better brakes in front too.

Rear brake calibers will come from Saab 9000 with BMW e36 280x10 discs. I am using those Saab calibers, because they have mechanical hand brake which is oblicatory in Finnish registeration inspection.

Today I lowered front end about 50mm, but forget to take picture.
keme
Forumsberoende
Inlägg: 508
Blev medlem: tor nov 12, 2009 10:01 am
Ort: Finland

Inlägg av keme »

Wow. 3 months since last update and almost nothing has happened.

Rear brakes are done with Saab 9000 brake calibers and BMW 280x10 discs.

Bild

After all I decided to do also new front brakes. Easiest solution seams to be VW Golf 288x25 disc and Saab 9000 brake caliber. Disc needs a little manufacturing and brake caliber a adapterplate to fit, but relatively easy to do.

I was thinking to build a Watt-linkage to rear axle. After few calculations I didn´t concider it any longer, because I can build long enough Panhard and it will move axle one centimeter to the side at maxmum inbound. It is also a lot easier to do than Watt.

Because I am using a adapter plate between engine and gearbox I had to find a thicker flywheel. It was found from Saab 9-5

Bild

A little bit of lathe and it will become few kilos lighter. There will also be Sachs -618 pressure plate fitted and made place for bearing for gearbox main shaft.

Few pictures of cooler fitting, retro hood locks and 7x17" steel wheels.

Bild

Bild

Bild

Bild
keme
Forumsberoende
Inlägg: 508
Blev medlem: tor nov 12, 2009 10:01 am
Ort: Finland

Inlägg av keme »

About 3 months again.

Fitted IV Golf 288x22 front brake disks

Bild

And Saab 9000 front calibers

Bild

Nearly good fit.

Allstar 28" x 16" aluminum radiator test fitted in engine bay.
Bild

End (and the only one) silencer

Bild

Bild

Bild

More fotos in http://keimo.kuvat.fi/kuvat/Saabel+Rekord+C+-66/
EmilBoström
För mycket laddtryck
Inlägg: 112
Blev medlem: mån sep 22, 2008 12:40 pm

Inlägg av EmilBoström »

nice :thumbright:
Skriv svar