b230 slant ?

Diskussioner för erfaret folk
bmw2101
För mycket laddtryck
Inlägg: 114
Blev medlem: tis feb 16, 2021 9:33 pm

b230 slant ?

Inlägg av bmw2101 »

ive got my b230 in my bmw, i put it in on the wrong angle, how can i tell where the engine should sit? Is there a point that should be horozontal on the block ive not spotted? :doh:


thankyou
Erland Cox
Topplocks-guru
Inlägg: 6965
Blev medlem: mån okt 15, 2007 10:00 pm
Ort: Lund
Kontakt:

Re: b230 slant ?

Inlägg av Erland Cox »

If you have a Volvo 230 gearbox you can check the gear box angle.
It should stand straight.

Erland
whilliam
Forumsberoende
Inlägg: 1695
Blev medlem: fre jul 31, 2015 11:30 pm
Ort: Joachim Whilliam Brandin. Björklinge

Re: b230 slant ?

Inlägg av whilliam »

Here is a discussion: viewtopic.php?p=583431#p583431

Jens is speaking about oilfill cap, and how it should be horizontal.

At this picture, it seems as if the distributor is vertical (but the picture might be lying)
Bild
Användarvisningsbild
Kadett4wd
Forumsberoende
Inlägg: 10189
Blev medlem: fre dec 23, 2005 10:49 pm
Ort: Patrick Wetterskog Ludvika tel:0707928582

Re: b230 slant ?

Inlägg av Kadett4wd »

15degrees?
///AMG
Att jag blir tyst i långvariga oeniga diskussioner beror OFTAST på att det inte är lönt diskutera längre, inte att ni hade rätt :D
Varning! Alexander Erik Sjöberg, skriven i Gävle, Väldigt frekvent bedragare!
psa
För mycket laddtryck
Inlägg: 319
Blev medlem: lör apr 21, 2012 9:21 pm

Re: b230 slant ?

Inlägg av psa »

As some has said, oil cap, distributor, carb manifold flange (if you got one), bottom of the oil pan, gearbox.
And in the end it's not super critical, and don't forget the longitudinal angle for the driveshaft.
bmw2101
För mycket laddtryck
Inlägg: 114
Blev medlem: tis feb 16, 2021 9:33 pm

Re: b230 slant ?

Inlägg av bmw2101 »

thanks, i thought the oil cap but wasnt sure!

I dont have a dizzy on it, wasnt sure if the carb flange was straight!

Its got a is200 6 speed box on it, so i cant use the box as reference.

I had the motor in the car and i reolised i had it maybe at 10-20 degs out, it was well over, so im making new mounts. I can fit a much better exhaust now.



Is there a set length for the pipes on the exhaust too? i have a b230a, 531 head with the chamber work, 300 deg cam in it, and its about to get a set of twin stromberg 175;s on it.

thanks!!
Skriv svar