Tack!

En liten presentation av er själv (frivillig)
roosm+
För lite laddtryck
Inlägg: 2
Blev medlem: lör jun 12, 2021 1:26 pm

Tack!

Inlägg av roosm+ »

Sitter I Australen med en 144s1970
roosm+
För lite laddtryck
Inlägg: 2
Blev medlem: lör jun 12, 2021 1:26 pm

Re: Tack!

Inlägg av roosm+ »

Finders på turbo på min B20b dubbla Stromberg
Kan man trycka genom Stromberg?
Bill bara ha lite roligt medan Jag bygger my motor!
Inte så lätt att hitta delar här, bad rekomenders att upp graders för 150-200hk?
Tack from Down Under!
Användarvisningsbild
fredde_vit_pv
Sävar Turbo Racing
Inlägg: 2273
Blev medlem: sön dec 07, 2003 4:38 pm
Ort: yttertavle/umeå

Re: Tack!

Inlägg av fredde_vit_pv »

Jes, you can but have to block maybe the chokes and things(bimetal cold start system etc!?) that not compatible whith boost
and grind the needles diameter at the heightof lift when the turbo starts to boost.
the needles usaly needs to be as thin as possably the 1/3 at the bottom.
if the turbo flow more air than the needeljets can provide you have to lower the boost or go to enrichment somehowe
( hope you know the higher pressure fuelsystem regulation system needs already)

just my thoughts

//F
Användarvisningsbild
fredde_vit_pv
Sävar Turbo Racing
Inlägg: 2273
Blev medlem: sön dec 07, 2003 4:38 pm
Ort: yttertavle/umeå

Re: Tack!

Inlägg av fredde_vit_pv »

gissade på att du inte snackar svenska :)
Skriv svar