Saabel Garage; GMC Typhoon #FinnTyphoon
Re: Saabel Garage; Saabel Rekord V8
Next I should fit the Maxxecu Spaghetti monster in to the engine bay.
Re: Saabel Garage; Saabel Rekord V8
Ok. Decided to move engine towards fire wall because stock Volvo 740 prop shaft was too short.
Now the engine is in quite good spot and prop shaft fits like a glove Driver side exhaust manifold needs quite much cutting but it is not a big problem.
Now the engine is in quite good spot and prop shaft fits like a glove Driver side exhaust manifold needs quite much cutting but it is not a big problem.
-
- Forumsberoende
- Inlägg: 2576
- Blev medlem: fre feb 26, 2010 3:47 pm
- Ort: Bollebygd
Re: Saabel Garage; Saabel Rekord V8
Garagetråden
PV 544 -64 - frugans sommarbil!
Projekt hysterisk seven - Projekttråd
245 GLT -90 - brukis, snart med V12a!
Amazon kombi -64 - brukisprojekt!
Cheva brandbil -45 - hotrod XXXXL!
Cheva master deluxe -38 - blivande street/ratrod!
+Nåra T!
PV 544 -64 - frugans sommarbil!
Projekt hysterisk seven - Projekttråd
245 GLT -90 - brukis, snart med V12a!
Amazon kombi -64 - brukisprojekt!
Cheva brandbil -45 - hotrod XXXXL!
Cheva master deluxe -38 - blivande street/ratrod!
+Nåra T!
Re: Saabel Garage; Saabel Rekord V8
Got the exhaust system done. Bought a set of C5 Corvette manifolds, mated it with 2.5" pipe and jammed in 3.5" collector. Should be good for mildly cammed 5.3 LS Driver side exhaust pipe goes over the gearbox because that way it doesn´t eat out the ground clearance.
Had to relocate coils because there were no mounting points in new valve covers.
Had to relocate coils because there were no mounting points in new valve covers.
Re: Saabel Garage; Saabel Rekord V8
Decided to fit the hood...
It required a bit of cutting
Just a bit through
Luckily this is not a show car. Have to fiqure out later a bit of something for the old turbo hole
It required a bit of cutting
Just a bit through
Luckily this is not a show car. Have to fiqure out later a bit of something for the old turbo hole
Re: Saabel Garage; Saabel Rekord V8
Weighted the LS. Aluminum block 5.3, no starter, flywheel, power steering pump or liquids ; 182kg. Not bad!
Re: Saabel Garage; Saabel Rekord V8
Got Corsa powersteering assembled.
Also put new radiator in place. It is some Nissan S14 aluminum radiator and biggest that could be fit decently. Radiator cap is about 1cm from the bonnet.
Re: Saabel Garage; Saabel Rekord V8
Wiring harness quite much ready, coolant lines quite much ready. Looking goood
I don´t know if it is possible to build car in Scandinavia without Volvo coolant expansion tank
I don´t know if it is possible to build car in Scandinavia without Volvo coolant expansion tank
- * * * NXJ * * *
- Forumsberoende
- Inlägg: 2435
- Blev medlem: tis aug 30, 2005 9:49 pm
- Ort: Strängnäs (Född, uppväxt i Ume)
- Kontakt:
Re: Saabel Garage; Saabel Rekord V8
Nice
NXJ
NXJ
Niklas Jonsson Mikaloff
- - - - - - - - - - - - - -
-Volvo Pv taksänkt mm
-BusJapanHoj
-VW Tiguan
-Ford Focus TDCI Titanium
- - - - - - - - - - - - -
- - - - - - - - - - - - - -
-Volvo Pv taksänkt mm
-BusJapanHoj
-VW Tiguan
-Ford Focus TDCI Titanium
- - - - - - - - - - - - -
Re: Saabel Garage; Saabel Rekord V8
Drove the first meters!
https://www.instagram.com/p/CCJ0bDthECM/
Few minor problems; clutch is not engaging fully, 2&4 gear is not engaging (gear stick issue) and there are few coolant leaks. So, all in all quite good
https://www.instagram.com/p/CCJ0bDthECM/
Few minor problems; clutch is not engaging fully, 2&4 gear is not engaging (gear stick issue) and there are few coolant leaks. So, all in all quite good
Re: Saabel Garage; Saabel Rekord V8
Clutch started working when I adjusted clutch pedal and got more throw to cylinder. With previous SRE754 it worked perfectly, but now SRE765 requires more movement. Also gear stick needed a bit adjusting. Biggest problems were when I noticed some metal glitter on oil. It turned out that I didn´t wash and clean all the parts properly after machining and there were some metal shavings inside engine Luckily there were no further damages.keme skrev: Few minor problems; clutch is not engaging fully, 2&4 gear is not engaging (gear stick issue) and there are few coolant leaks. So, all in all quite good
Now everything looks very good and therefore I booked dynotime for this Friday! On Saturday I am going to participate on grass roots drifting day
Very exciting times
Re: Saabel Garage; Saabel Rekord V8
YESSSSSS!!!!
Got it tuned on Friday and went track on Saturday.
https://www.instagram.com/p/CDsya91B5EU/
Had brake issues, steering was a bit funny, a little bit of heat problems, aux belt was slipping of and probably LSD is slipping also. So a bit of repairing, but anyway I got to drive!
Have to fix the problems and go to the track next month!
Got it tuned on Friday and went track on Saturday.
https://www.instagram.com/p/CDsya91B5EU/
Had brake issues, steering was a bit funny, a little bit of heat problems, aux belt was slipping of and probably LSD is slipping also. So a bit of repairing, but anyway I got to drive!
Have to fix the problems and go to the track next month!
Re: Saabel Garage; Saabel Rekord V8
Are you using the stock accessories and deleted the power steering pump?
I did that on my car and it didnt work as good as the internet said it would. But i bought one of these and never had any more problems:
https://www.ebay.com/itm/LS-Truck-Idler ... SwR8lc-M2p
It relocates the idler pulley so the belt gets a different routing
I did that on my car and it didnt work as good as the internet said it would. But i bought one of these and never had any more problems:
https://www.ebay.com/itm/LS-Truck-Idler ... SwR8lc-M2p
It relocates the idler pulley so the belt gets a different routing
Re: Saabel Garage; Saabel Rekord V8
Yes, I did exactly that and it doesn´t work at all. The aux belt keeps sliping off probably because the route from alternator to crank pulley is too long. I put a gopro shooting at the serpentine belt and that alternator -> crank side moves A LOT.Steve skrev:Are you using the stock accessories and deleted the power steering pump?
I did that on my car and it didnt work as good as the internet said it would.
Thanks for the tip! I have to check out that relocator.