Postat: sön maj 14, 2006 10:17 pm
almost done with the right side
cleaned the arm on the inside
the reinforcement on its place
When finished with this I attack the backside
Sida 8 av 8
Postat: mån maj 22, 2006 7:27 pm
I opened the front chassis to weld on thicker plates (3mm) to reinforce it. My rollcage will come to this point so it will form one solid construction. The drag tires also have arrived.
cleaned the arm on the inside
the reinforcement on its place
When finished with this I attack the backside
cleaned the arm on the inside
the reinforcement on its place
When finished with this I attack the backside
Postat: mån maj 22, 2006 7:56 pm
Nice 
Did you get hold of any bellhouse to the M400?
Did you get hold of any bellhouse to the M400?
Postat: mån maj 22, 2006 11:37 pm
Found one yes, brand new, some guy refabricates these I think. But I sold the gearbox and bellhousing to a friend of mine.Dalmasen skrev:Nice
Did you get hold of any bellhouse to the M400?
Postat: lör maj 27, 2006 7:16 pm
Postat: lör maj 27, 2006 7:51 pm
it sure looks good 
Postat: mån jun 05, 2006 10:20 pm
removal of the rear jacking points, right side was in much better condition as the left side...
Postat: tis jun 06, 2006 2:43 pm
damn! thats a lot of rust, i just fixed my new 245 a bit.. it sux 
Postat: mån jul 03, 2006 9:40 pm
new jacking points and cutting away final bad spots out of the chassis
Other polyester parts, I'll weight the parts next week.
Other polyester parts, I'll weight the parts next week.
Postat: mån jul 03, 2006 11:01 pm
You are doing a really great job mate, that car will be so neat when its done 
Postat: fre jul 21, 2006 11:20 pm
how is it going whit the car koen ? it was some time since you updated us on the project im a bit corius
Postat: lör jul 22, 2006 10:53 am
Well, the right side of the chasis is finished too, but I had forgotten my camera for taking pictures. Then I've helped my friend on his 244 so I haven't worked on it since then, the 244 is ready so I can start again with my works.