Hi,
I have a question for the Holset masters,
I bought a Holset turbo from a turbo dealer in my area for my Mercedes M104 2.8 project.
The specs on the turbo,
Holset HX40w Compressor housing.
8 Blade 60mm x 86mm
Holset HX35 Turbine Housing 12cm Twin scroll.
12 Blade 64mm x 76mm
My question is how much HP can i get from this turbo?
Thank you
Holset Hybrid Turbo Advice Please
-
- För lite laddtryck
- Inlägg: 9
- Blev medlem: fre jun 16, 2017 7:49 pm
- Ort: South Africa
Holset Hybrid Turbo Advice Please
W114 1973
M104.945 2.8L Soon to be turbo'ed
Chris Snoer
M104.945 2.8L Soon to be turbo'ed
Chris Snoer
-
- För lite laddtryck
- Inlägg: 9
- Blev medlem: fre jun 16, 2017 7:49 pm
- Ort: South Africa
Re: Holset Hybrid Turbo Advice Please
Thank you Big Al,
Its more than i need.
I was just hoping that it can flow more than 400bhp.
Its more than i need.
I was just hoping that it can flow more than 400bhp.
W114 1973
M104.945 2.8L Soon to be turbo'ed
Chris Snoer
M104.945 2.8L Soon to be turbo'ed
Chris Snoer
Re: Holset Hybrid Turbo Advice Please
I have a very similar turbo on my BMW 2.8l engine. I have 505hp on The hubs at around 1.2bar without stressing The turbo.
My turbo is a holset hx40w 58mm in and 65mm out without #17 housing
My turbo is a holset hx40w 58mm in and 65mm out without #17 housing
Jens Karlsson
-
- För lite laddtryck
- Inlägg: 9
- Blev medlem: fre jun 16, 2017 7:49 pm
- Ort: South Africa
Re: Holset Hybrid Turbo Advice Please
Very good power at 1.2bar!
but you have much larger exhaust housing, mine is 12# from HX35
but you have much larger exhaust housing, mine is 12# from HX35
W114 1973
M104.945 2.8L Soon to be turbo'ed
Chris Snoer
M104.945 2.8L Soon to be turbo'ed
Chris Snoer