inte lätt att försöka svara på saker närfolk inte vill ha hjälp heller ,
tror jag ska skita i svara på saker på sånna här forum
Radiestål för ventillåsningsspår och lite idéeer sökes.
- calle Bengtsson
- Forumsberoende
- Inlägg: 791
- Blev medlem: fre maj 25, 2007 7:27 pm
- Ort: Stockholm
- Kontakt:
oki
trött Familje far.... Hobby Bil Volvo 850 Kombi
Åker BMW 123 D ))
Åker BMW 123 D ))
Re: oki
Måste bara fråga va du menar. Jag va öppen för alla typer av förslag. Skulle du svarat eller om jesper skulle svarat spelar väll mindre roll sålänge svaret kommer från en erfarenhet...calle Bengtsson skrev:inte lätt att försöka svara på saker närfolk inte vill ha hjälp heller ,
tror jag ska skita i svara på saker på sånna här forum
Mercedes-Benz 190E 2.3 16v Turbo.
Re: Radiestål för ventillåsningsspår och lite idéeer sökes.
This is an old post, but i am working on something similar so wanted to share my solution.
For triple groove use
TE3.0150.07VL 1.5mm x 0.75mm Full Radius Simturn E3 Grooving Inserts (Simtek)
For single groove use
TE3.0280.14VR 2.8mm x 1.4mm Full Radius Simturn E3 Grooving Inserts (Simtek)
These are available as single inserts from Cutwel.co.uk
My thought is to use single groove as this style keeper grips the valve stem. After machining triple style grooves, the stainless steel may not be hard enough to avoid groove wear.
Available as Right Hand or Left hand
Holder is available (£70) but i made my own.
Hope this information helps in the future.
For triple groove use
TE3.0150.07VL 1.5mm x 0.75mm Full Radius Simturn E3 Grooving Inserts (Simtek)
For single groove use
TE3.0280.14VR 2.8mm x 1.4mm Full Radius Simturn E3 Grooving Inserts (Simtek)
These are available as single inserts from Cutwel.co.uk
My thought is to use single groove as this style keeper grips the valve stem. After machining triple style grooves, the stainless steel may not be hard enough to avoid groove wear.
Available as Right Hand or Left hand
Holder is available (£70) but i made my own.
Hope this information helps in the future.
- Bilagor
-
- 9DFE02C0-9120-47BD-AEBA-4ABECDB733E9.jpeg (183.29 KiB) Visad 884 gånger
-
- 9FE95B67-48FF-419D-9E49-E5901F77885F.jpeg (254.55 KiB) Visad 884 gånger
-
- 86BAD5E1-51D3-406C-B911-F8654F65BAFD.jpeg (405.75 KiB) Visad 884 gånger