Saabel Garage; Chevy C1500 Pickup

Projektrådar med information och bilder om olika byggen
keme
Forumsberoende
Inlägg: 536
Blev medlem: tor nov 12, 2009 10:01 am
Ort: Finland

Re: Saabel Garage

Inlägg av keme »

Bild

Removed the original CIH engine from caravan and sold it. Next week I am going to pick up a new engine for it. Omega c20ne engine + automatic gearbox :) not fast nor powerfull but quite reliable and should be easy to put in the engine bay. Also next week I am going to get Saab engine away from Saabel and open it. Hoping that it is just bottom end bearings which have broke.
keme
Forumsberoende
Inlägg: 536
Blev medlem: tor nov 12, 2009 10:01 am
Ort: Finland

Re: Saabel Garage

Inlägg av keme »

Bild

Almost got the engine away. Just when I started to lift it the lifting mechanism broke and it didn´t lift anything. Atleast the lift off is quite close now :D
keme
Forumsberoende
Inlägg: 536
Blev medlem: tor nov 12, 2009 10:01 am
Ort: Finland

Re: Saabel Garage

Inlägg av keme »

Bild

Bild

Bild

Bild

Bild

Clutch, pressure plate and flywheel look ok. Pilot bearing instead is totally broken.
keme
Forumsberoende
Inlägg: 536
Blev medlem: tor nov 12, 2009 10:01 am
Ort: Finland

Re: Saabel Garage

Inlägg av keme »

Bild

Bild

Opened the engine and all the bearings looked about that. Bigger problem is that gold nuggets to the oil were from crank shaft trigger wheel.

Bild

Bild

Well, why did the piston in 4th cylinder hit the trigger wheel?

Bild

Bild
1st piston.

Bild
2nd piston.

Bild
3rd piston.

Bild

4th piston.

Bild

Bild

And for the bonus exhaust valves had hit in the piston once in 1st cylinder and twice in 3rd.
keme
Forumsberoende
Inlägg: 536
Blev medlem: tor nov 12, 2009 10:01 am
Ort: Finland

Re: Saabel Garage

Inlägg av keme »

Bild

Little updates:
- Sold the HX35 and 50mm wastegate
- Purchased HX40super and "new" used con rods
- Going to buy a 60mm wastegate to go with the new turbo

Hoping to achieve less exhaust pressure and more power for next summer :)
Blacksmoke
Lite mer laddtryck
Inlägg: 33
Blev medlem: fre jan 18, 2013 9:42 pm

Re: Saabel Garage

Inlägg av Blacksmoke »

the rod on 1st looked a little bent
keme
Forumsberoende
Inlägg: 536
Blev medlem: tor nov 12, 2009 10:01 am
Ort: Finland

Re: Saabel Garage

Inlägg av keme »

Bild

Got new engine and transmission to Caravan from Omega.
keme
Forumsberoende
Inlägg: 536
Blev medlem: tor nov 12, 2009 10:01 am
Ort: Finland

Re: Saabel Garage

Inlägg av keme »

Bild

Rebuild parts to Saabel :)
keme
Forumsberoende
Inlägg: 536
Blev medlem: tor nov 12, 2009 10:01 am
Ort: Finland

Caravan Rekord

Inlägg av keme »

Bild

Test fitted engine and gearbox. Seams to fit very nicely! Doesn´t require any cutting to firewall or to the floor.
keme
Forumsberoende
Inlägg: 536
Blev medlem: tor nov 12, 2009 10:01 am
Ort: Finland

Re: Saabel Garage

Inlägg av keme »

Bild

Oh yeah! Engine mounts ready!
keme
Forumsberoende
Inlägg: 536
Blev medlem: tor nov 12, 2009 10:01 am
Ort: Finland

Re: Saabel Garage

Inlägg av keme »

Bild

Gearbox bracket done. Now the engine and gearbox are mounted in the car without any extra supports :)
keme
Forumsberoende
Inlägg: 536
Blev medlem: tor nov 12, 2009 10:01 am
Ort: Finland

Caravan

Inlägg av keme »

Bild

Bought a se set of 8x15 wheels with 175/50/15 tires. They do look ridiculous :D but with new color on wheels, bigger tires and modest suspension drop it will look ok.
Användarvisningsbild
Mattias-M
För mycket laddtryck
Inlägg: 139
Blev medlem: lör jan 19, 2013 10:29 pm
Ort: Östergötland

Re: Saabel Garage

Inlägg av Mattias-M »

slam it and get 1000 whp, what a beast then ;-)
keme
Forumsberoende
Inlägg: 536
Blev medlem: tor nov 12, 2009 10:01 am
Ort: Finland

Re: Saabel Garage

Inlägg av keme »

Mattias-M skrev:slam it and get 1000 whp, what a beast then ;-)
Haha, good idea but it is going to be smooth Low-budged-cruiser for now. Atlest for next summer :)
keme
Forumsberoende
Inlägg: 536
Blev medlem: tor nov 12, 2009 10:01 am
Ort: Finland

Re: Saabel Garage

Inlägg av keme »

Bild

Changed original steering parts to Opel Omega power steering. Requires a bit of cut-off and weld-on, but it will be very OEM looking after all :)
Skriv svar