Sävar Turbo Site

I have a b230 with the E type inlet, it has a 300 deg t5 cam in it, upped the compression, im hoping for 160-190 bhp out of it. I had the volvo t5 injectors in it, but they are damaged. They are expensive here now , what CC of injector should i be looking at. M3 ones are 263CC but im not sure if they are big enough as i the T5 ones were 345CC

thanks

What kind of efi system are you running

microsquirt, sorry forgot to say. its all programmable

I would go for something in the 400cc range giving a bit extra headroom.

Also depends on if you are planning to buy new or source it from the junk yard

Or
https://www.bildelsbasen.se/sv-se/OEM/9179379

Volvo V40/S40

440cc

thats fantastic, ive found some on ebay here in England, £135, i take it these are cone type spray pattern? thanks



Part number: Siemens Deka 9179379.
Please check your own injectors are identical before purchase.
Flow rate: c.360cc/min at 3 bar of pressure.
Resistance: c.15.3 Ohms (high impedance).
New parts fitted: Filters & o-rings.
Quantity: 4 (one set).
Test report: Included (see images for example).
For: Volvo S40 & V40 models using the 1.9/2.0 T4 turbo engine.

Strange

Green 9179379 440cc

Grey 9179379 340cc

Red 9179379 315cc??

Unfortunately i have red

It's embarrassing, didn't see Steves

well thankyou both! ive ordered the grey ones, even though it says 360cc in the ebay advert.